Top 10 Best Deep Well Jet Pumps (2020)

If you purchase an independently reviewed item through our site, we earn an affiliate commission. Read our affiliate disclosure.

The selection or construction of a well pump takes much more than simple ABC. It even demands much more vigilance if you are moving in a house that has an existing well.  Top on the list of the things to consider is the expert who will install it. You also have to consider the way it should be constructed and where the well should be located within the property. You should also find out how you will ensure the water will be clean and safe. It is therefore wise to know what you are getting into before you buy a deep well jet pump. One of your best bets is to hire a professional installer if you do not intend to dig the well on your own. All details about when the well was dug, its location, and any concerns should be kept on record since these are required if later on you consider selling your house. The latest water tests will also be required at the time of sell. All required standards should be met and superseded.

Concern with Well Water

The deep well jet pump may require no maintenance but that does not imply complete negligence of the pumping system after installation. In fact, it would be useful to conduct some routine checks even when it is deemed unnecessary. Of uttermost importance also is to ensure everything is done right from the beginning. Dug wells are highly susceptible to contaminants such as sodium, nitrites, bacteria, and many others. These can be kept away through proper design and construction of the well. The well should be tight and out of reach from dust, animals, surface water, or any type of invader. This will prevent potential contamination and guarantee clean drinkable water.

Chemicals and harmful substances may also end up in your well if well location is not properly selected. The well should lie within a location that is as far as possible from potential contaminants. These would include: septic tanks, above ground and underground chemical tanks, leach fields, areas prone to flooding, where pets and livestock are kept, mines, or on downhill. A well should be on an elevated ground so as to give the assurance that the water is not contaminated before it flows into the well.

The best deep well jet pumps do an excellent job when it comes to availing clean drinkable water to households and other operations. The design of these pumps ensures consistent and seamless supply of the life-giving water. Some of the best deep well jet pumps highlighted below boast a number of features that stand out from the rest. Let’s check them out.

Best Deep Well Jet Pumps

10. Fe Myers HJ100D Deep Well Jet Pump

To start the list of the best deep well jet pumps is this model that comes fully-packed with features that make it possible to draw water from a deep well. This multi-use deep well jet pump with its 1 HP motor is known for its high level performance, reliability, and durability. It is a dependable cast iron make pump that suits most operations including; farms, industrial operations, households, and business enterprises. It’s the combination of features that differentiates this pump from other brands in the market. Worth mentioning is the precision molded impellers and diffuser that provide a balanced and seamless water pumping process. The heavy duty cast iron of the pump also gives it an extended life in service. Its motor is also very powerful, fitted with double ball bearing in addition to a voltage selection device, just to mention a few.

Features

• This is a deep well jet pump made of industrial grade cast iron material for prolonged service life.
• It has precision molded impellers in addition to a diffuser that ensure the water pumping process is smooth, balanced, and seamless.
• It comes with a top level pressure switch that is adjustable. Its differential is 20 PSI.
• The 1 HP motor has double ball bearing design as well as voltage selection device for maximum convenience.
• The mechanical shaft seal is made of stainless steel and has a ceramic face that guarantee a long life.
• Powerful motor capable of generating flow rate that meet the needs of many operations.
• Weighs 62 pounds.

Pros and Cons

Pros

• Durable well pump.
• Highly efficient.
• Require minimal maintenance.
• Economical in terms of energy consumption.
• Powerful pump.
• Quiet operation.
• Great value for money.
• Adjustable pressure switch.
• Heavy duty, longer lasting and top performing motor.
• Reliable.
• Affordable.
• Versatile.

Cons

• Setup instructions leave a lot to be desired.

Check Price

 

9. Superior Pump 94715 3/4 HP Convertible Jet Pump

One of things to look out for before buying a well pump is the quality proposition. Price is a factor to consider also though it should not be overemphasized. A good quality pump will definitely be competitively priced and hence the need to check out the pump specifications beforehand. The Superior Pump 94715 is available in two styles: a ¾ HP and 1/3 HP models. These pumps are very powerful and can handle even the most demanding operations. The motor is dual voltage meaning greater efficiency and performance.

The pump’s casing is made of rugged cast iron material that is not only strong but also durable. The impeller is made of thermoplastic, tough and longer lasting. The diffuser on the other hand is made of glass filled thermoplastic for top performance and seamless operation. The pressure switch comes pre-mounted and is adjustable. Available also is a cast iron plate that is durable.

Features

• This is a deep well jet pump powered by either ½ or ¾ HP motor.
• The pump construction is cast iron which is sturdy and longer lasting.
• The diffuser and impeller are made of thermoplastic which is tough and durable. This helps guarantee seamless performance.
• The seal plate if made of cast iron for longer service life.
• It has a pressure switch that is pre-mounted and comes with adjustable settings. It is preset at 20/40 PSI.
• The motor has thermal protection to prevent overheating. It can be set at 115 or 230 Volts.
• The flow rate attainable is a maximum of 588 GPH at 0 feet.
• The NPT discharge is 1 foot and NPT suction 1-1/4 inches.
• Included in the package are the jet pump, manual, and ejector kit.
• This works for both deep and shallow wells. It can handle wells of up to 80 feet.
• The pump dimensions are 9 x 16 x 8 inches and weighs 34 pounds.

Pros and Cons

Pros

• Thermal overload protector secures the motor.
• Very powerful well pump.
• Works for both deep and shallow wells.
• Rugged cast iron construction is durable.
• Adjustable pressures switch for your convenience.
• Good flow rate.
• Manual is available.
• Easy to use.
• Quality for the money.
• Reliable.
• Works as expected.
• Can be used for both deep and shallow wells.

Cons

• No negative feature noted.

Check Price

 

8. Acqauer CJE75 Convertible Jet Pump

The Acqauer CJE75 3/4 HP Dual-Voltage jet pump offers the best of all worlds given the fact that it is a convertible jet pump. It is designed to give benefits of both a shallow as well as deep well jet pump. The dual voltage motor that powers the kit is powerful enough to draw water from wells of up to 147 feet maximum head. The motor can be set at 115 or 230 volts since it is dual voltage and it is capable of delivering sufficient flow rate to cater for the needs of those with wells of 26 to 80 feet. Its voltage selection switch is easy and quick to change and a pressure switch is also available preset at 30/50 psi. Its dedicated volute is made of cast iron material and thus it is durable.

Features

• It has a pressure switch pressure at 30/50 psi to give best pressure delivery.
• This is a convertible jet pump that works perfectly on wells of between 26 feet to 80 feet.
• It can run on dual voltage of 115/230 volts.
• The ¾ HP motor that powers the pump comes with voltage change switch.
• The pump is backed by a 2 year limited warranty.
• It includes 1-1/4 in. suction and 1 in. discharge with ejector.
• The maximum head lift is 147 feet.
• Pump weighs 31.9 pounds.

Pros and Cons

Pros

• It is double purpose pump suitable for deep and shallow wells.
• Comes with dual voltage motor.
• Very powerful pump.
• Reliable.
• Versatile to meet the needs of most operations.
• It includes adjustable pressure switch.
• Easy to operate.
• Provides a desirable flow rate.
• Affordable.
• Silent when in operation.
• Well built and highly durable well pump.

Cons

• No negative feature noted.

Check Price

 

7. Simer 3307P 3/4 HP Convertible Deep Well Jet Pump

While it seems like we have so many options to choose from when selecting a well pump, it proves daunting in reality to know what to settle for. Deep well jet pumps are particularly alluring in every sense. The wide spectrum of brands and models that are available seem the same considering things like power capability, flow rate, longevity, and capacity. Fortunately, none is created equally and hence the need for one to check out specific features before making a choice. There are some small differentiators that make major difference when you think about it. For instance, the Simer 3307P is a model that is convertible, meaning it can work for the deep and shallow well. It also has a ¾ HP motor and that means greater pumping ability; Needless to mention the fact that it has a flow rate of up to 15.3 GPM.

Features

• Wattage 1403 watts, voltage 230 volts, Horsepower of 0.75 and flow rate of 15.3 GPM.
• Its power source is corded electric.
• This is a convertible jet pump and hence will work for both shallow and deep wells. It hand hold in wells of up to 70 feet.
• It is made of sturdy thermoplastic construction.
• Has a 1 inch size discharge pipe.
• Comes with a dual voltage motor that is already preset at factory level to 230 volts.
• Works well for most water pumping operations. You can use it for irrigation, draining the pool, watering household, farm, cottage, and many others.
• Pump dimensions are 19 x 11.1 x 11.1 inches and weighs 27.3 pounds.

Pros and Cons

Pros

• Dual motor offers maximum convenience.
• It is a top performer.
• Operates quietly.
• Made of durable thermoplastic.
• Not prone to corrosion or rusting.
• Lightweight and easy to handle.
• Economical in terms of power consumption.
• Reliable.
• Works as expected.
• Offers a good flow rate.
• Versatile.

Cons

• The thermoplastic construction may not be strong enough when compared to other types such as stainless steel and cast iron.

Check Price

 

6. Flotec FP4322 Convertible Jet Pump

The decision to invest in a reliable well pump should never be taken lightly. First off, the well pump does not come cheap and that means you have to dig deep into your pocket. It should therefore be worth every penny. Secondly, the pump that will supply drinking water for your household should be safe and reliable. I bet you do not want to install a pump that will have a negative impact on your household. Thirdly, you need a pump that will withstand all nature elements such as corrosion, rusting, contamination and abrasion. Therefore, there is no question or compromise on quality.

The Flotec chain of pump pumps seems to have won the hearts of many and there should be a good reason for it. On top of the list is quality. This is a brand that does not take chances when it comes to product quality. The products are also competitively priced. You get quality for your money. In terms of performance, these are pumps that boast top notch flow rate to meet the needs of most operations. The Flotec FP4322 ranks among the best deep well jet pumps when evaluated based on the criteria laid down here. It is a pump that not only delivers but has been built to last. Some of its pump specs, pros and cons are as follows:

Features

• It is a convertible deep well jet pump meaning it can be used as shallows and deep well pump. Works well for wells of 2 inches or larger.
• When used for shallow wells it can handle depths of up to 25 feet and for the deep well it works perfectly for wells of up to 110 feet.
• It is made of corrosion-resistant thermoplastic material that is fiberglass-reinforced. The pump can withstand abrasion and sand and guarantee years of uninterrupted service. Some of its parts are made of stainless steel also.
• It features an inbuilt regulator that can be adjusted. This therefore makes the pump one of the best performing on all deep wells.
• It includes a pressure gauge.
• It is supplied with power through an electric cord.
• The motor is 2 HP, 230 volts which is powerful to generate the best flow rate.
• Backed by a 1 year warranty.
• Pump dimensions 12 x 20.8 x 11.8 inches and it weighs 27.4 pounds.

Pros and Cons

Pros

• Powerful pump.
• Reliable.
• Warranty available.
• Has a pressure gauge.
• Comes with a regulator that is inbuilt.
• Durable.
• Versatile.
• Works for both deep and shallow wells.
• Resistant to abrasion and corrosion.
• Quality for money.
• Quiet when in operation.
• Manual provided.

Cons

• You need to buy the injector kit separately.

Check Price

 

5. Flotec FP4312 Convertible Jet Pump

This is a top model from Flotec that boasts a plethora of features that provide a perfect balance between quality and performance. To begin with, the pump is designed to help those with shallow wells as well as deep wells. The jet pump is powered by a ½ HP motor that is capable of delivering up to a maximum of 9 GPM. Its casing is abrasion and corrosion-resistant thermoplastic that has been reinforced with fiberglass. The pump comes with an inbuilt regulator that can be adjusted for best performance. It ensures the pump works well for all deep wells. It is also worth mentioning that is pump will pump water from a well that is 25 feet for the shallow well and up to 110 feet for the deep well. You can use this pump for wells of 2 inches or larger in terms of diameter.

Features

• This is a convertible jet pump that is powered by a ½ HP, 100 volts
• The pump is designed to be installed in shallow and deep wells that are 2 inches wide or more.
• It can draw water from shallow wells of 25 feet and deep wells that are 110 feet maximum.
• It is made of thermoplastic material that is reinforced with fiberglass. This is rugged in design and can resist corrosion and rust. This gives you the assurance of a longer service life.
• It comes with a built-in regulator that guarantees top performance for all deep wells.
• The pressure gauge is included.
• Can deliver a maximum flow rate of up to 9 GPM when in a shallow well.
• Powered by an electric cord.
• Pump dimensions are 12 x 20.8 x 11.8 inches and weighs 24 pounds.
• Backed by 1 year warranty.

Pros and Cons

Pros

• Comes with pressure gauge.
• Works for both shallow and deep wells.
• Resistant to abrasion and corrosion.
• Durable.
• Reliable.
• The built-in regulator makes it ideal for all deep wells.
• Powerful motor delivers the best flow rate.
• Covered by warranty.
• Compatible with other models.
• Works as advertised.
• Value for money.

Cons

• Can be a bit difficult to use and setup if you don’t know what you’re doing.

Check Price

 

4. ECO-FLO Products EFCWJ7 Deep Well Jet Pump

ECO-FLO Products is another brand that resonates with most buyers of well pumps. Its The ECO-FLO Products EFCWJ7 is a deep well jet pump that is a top performer. It is designed to cater for the needs of most operations. It has a high capacity and ranks higher when it comes to flow rate and head performance.  Just like all other ECO-FLO models this model meets required standards of CSA. In terms of longevity this pump is longer lasting. It is powered by a dual voltage motor 115/230 Volts preset at factory at 230V.  Available also is a built-in overload motor in addition to a well injector kit. The pump casing and all pump accessories such as shaft, rotor, mechanical seal, bearings, and windings are high quality.

Features

• This is a deep well jet pump that is powered by ¾ HP motor generating a flow rate of 7 GPM.
• The pump boasts superior performance and it has a high capacity. It is powerful enough to pump water from deep wells at 20 feet.
• The motor is dual voltage at 115/230V set at factory to 230 volts.
• The pump comes with all required injector kit such as jet nozzle, hardware, well injector casting, and venture tubes.
• It has a 1 inch discharge and 1-1/4 inch suction.
• The motor comes with top quality balanced rotor, stainless steel shaft, mechanical seal, and heavy duty bearings.
• Pump dimensions are 3 x 11.2 x 12.6 inches and weighs 38.5 pounds.

Pros and Cons

Pros

• Gives top level performance.
• It has excellent capacity.
• Delivers excellent pressure.
• Relatively affordable.
• Motor and pump components are high quality.
• Dual voltage offers reliable performance.
• The flow rate is desirable.
• Works great.

Cons

• No negative feature noted.

Check Price

 

3. WAYNE CWS50 Convertible Well Jet Pump

The US based WAYNE is a firm that has always been known for its unique and competitive well pumps. The ½ HP CWS50 pump is ideally a convertible well pump meaning it works for both the shallow well and the deep well. It can lift water from wells that have depths of up to a maximum of 90 feet. The pump is made of cast iron, rugged, sturdy and longer lasting. Since its motor is dual voltage it offers top level efficiency. It also has a pre-set switch in addition to a cast iron volute primarily dedicated for volute filling.

Features

• This is a convertible well jet pump that does a good job for wells with depths of 0 to 90 feet.
• It is available in ½ HP and ¾ HP motor options.
• It is powered by an electric cord.
• This is a US assembled pump with some of its parts sourced internally and overseas.
• The NPT discharge is ¾ inches and NPT suction 1-1/4 inches.
• It comes with a pressure switch set at 30-50 PSI to facilitate automatic operation.
• It is capable of delivering a flow rate of 408 GPH when at 0 ft for 50 PSI/CWS50 and for 50 PSI/CWS75 a flow rate of 462 GPH when at 0 feet.
• Its volute is made of cast iron material and has a dedicated priming port that facilitates volute filling.
• The jet assembly is required and it is sold separately.
• 3 year warranty is provided on parts.
• Pump dimensions are 7 x 12.8 x 11.5 inches and weighs 35 pounds.

Pros and Cons

Pros

• The dual voltage offers maximum efficiency.
• It has a pressure switch for automatic operation.
• It offers the best flow rate.
• Works well for both shallow and deep wells.
• Made is the US. Quality guaranteed.
• Longer lasting.
• Reliable.
• Runs quietly.

Cons

• You have to buy the jet assembly separately.

Check Price

 

2. ECO-FLO Products EFCWJ10 Deep Well Jet Pump

This is another top notch deep well jet pump that is designed for deep wells. It is available in ¾ HP, 1 HP, and 0.5 HP options. This pump is designed with a highly performing motor that certainly meets the needs of those with deep wells. The pump casing in addition to the pump components are all made of top quality material which guarantees a longer life of service. The dual voltage of 115/230V, boosts the efficiency of the motor. You can also get the user manual which makes installation and problem diagnosis hassle free.

Features

• Designed for deep wells.
• Powered by a dual voltage motor of 115/230V preset at factory level to 230V.
• The motor is made up of insulated windings, stainless steel shaft, mechanical seal, heavy-duty bearings, and balanced rotor.
• The user manual is available for all your information regarding installation, troubleshooting, safety, and warranty information.
• Has good flow rate of 20 GPH.
• Pump dimensions are 3 x 11.2 x 12.6 inches and weighs 40.7 pounds.

Pros and Cons

Pros

• User manual available.
• Durable.
• Reliable.
• Good quality pump.
• Compact.
• Good pumping pressure.
• Excellent flow rate.

Cons

• No negative feature noted.

Check Price

 

1. Goulds VJ10 60HZ Deep Well Pump

As a wrap up of the best deep well jet pumps is this model from Goulds. It is powered by a 1 HP motor that delivers water at high capacities. This pump is designed for deep wells and it has a design that makes maintenance easy and hassle free. The pumping system can be taken apart without interfering with the piping. This pump is a power horse that is designed to meet the needs of even the most demanding operations. Available within the pump is an automatic pressure control valve that helps the pump deliver at maximum capacity at all times. Some of the pump’s specs, pros and cons include the following:

Features

• This is a higher capacity well pump that is designed to deliver at top level rates.
• It is coated with corrosion resistant electrocoat that ensure the pump lasts for many years.
• The pump is easy to service. The bolts can be removed without interfering with the pipes.
• It has an adjustable automatic pressure valve that helps keep the pump at top level of operation at all times.
• Comes with a by-pass check valve that helps equalize pressure over the entire system and keeps the pump from losing its prime.
• This pump can work seamless for a long period since it has been designed to work non-stop. It is in line with the working limits set by the manufacturer.
• Dimensions are 8 x 14.8 x 12.8 inches and weighs 56 pounds.

Pros and Cons

Pros

• Highly versatile. Will work for most operations.
• Designed for continuous operation.
• Durable.
• Reliable.
• Has desirable flow rate.
• Easy to service.
• Does not lose prime.
• Easy to use.

Cons

• Quite expensive.

Check Price

 

A Final Word

A pump is a major part of any water system. It proves almost impossible to live without a pump. The jet pump can be housed in a well house or within the home. The working mechanism of the jet pump is via a suction process that makes it possible for the pumping system to draw water from the well to a reservoir or tank. The best deep well jet pumps discussed above have been designed to meet the water needs of a wide spectrum of operations.

Those with households, farms, a ranch, industrial plant, or irrigation schemes will benefit when they invest in a reliable jet pump for deep well. You should however, check out the pump specs before making a purchase. The need to an accredited well expert from pump selection, well location, and construction cannot be emphasized enough. Things are much easier when they are handled by those who are well acquainted with its ins and outs and that proves to be true for wells.