Top 10 Best Deep Well Submersible Pumps (2020)

If you purchase an independently reviewed item through our site, we earn an affiliate commission. Read our affiliate disclosure.

Clean drinking water may be easily accessible to residents who live in areas where the water table is near the surface. Nonetheless, mountainous or extremely dry regions have low water table hence making it almost impossible to access clean drinking water. It is also quite apparent that most of the pumps available in the market at the present time are designed to access depths of up to 25 feet. There are only a few exceptions where sophisticated jet pumps can draw water from depths of up to 120 feet. The best deep well submersible pumps makes it possible to draw water from depths of up to 400 feet. These pumps deliver seamlessly clean drinking water just as the case would be on a faucet at your kitchen sink. It is their unique design that make all this possible.

The Design of Deep Well Submersible Pumps

The deep well submersible pump comes in a cylindrical design. It is usually attached to a plastic water pipe and lowered into the surface of the well water. Once the pump touches the surface of the water, it is capable of pushing the water from the bottom of the well to the reservoir or tank positioned on the ground. As a matter of fact, a single deep well submersible pump is capable to pushing the water many hundreds of feet from the well.

The tubing that directs the water from the well is linked to a pressure tank that has a pressure switch. This switch links the well pipe to the tank and will regulate the water pressure depending on water usage within the household. When water is in use within the house, the pressure within the tank goes down causing the pressure switch to draw more water from the pump. This kick-starts the pumping process thus filling the tank until maximum pressure is attained. The switch then goes off until the pressure decreases once more.

Best Deep Well Submersible Pumps

10. TOTOOL 0.5HP/0.37KW Deep Well Submersible Pump

Built with a stainless steel casing and powered by a top performing motor is this pump that is designed for deep wells. It delivers a desirable flow rate to meet the water needs of most operations. Its impellers in particular are top performing hence providing a seamless flow of water for a long time. This is backed up by the fact that the pump is made of stainless steel which is resistant to corrosion and rust. You are therefore guaranteed of a long service life.

Remember also that this pump does not require priming or routine maintenance. It operates quietly underground and no one will ever notice you have a pump. The motor is an energy-saver delivering 25 GPM and can draw water from a 150 ft max head.  This is linked to the power source by a 5 ft electric cord. The pump also has a check-valve which helps prevent back-flow also.

Features

• This is a deep well submersible pump that is powered by a 0.5HP, 0.37 KW, and 7.5 A motor. The maximum head 150 FT and voltage is 220V/50HZ.
• Comes with 6 powerful impellers that offers the best hydraulic efficiency and prevent overload.
• The pump is made of solid stainless steel material, that is, the casing, discharge head, and motor adapter. This guarantees top performance and a longer service life.
• The industrial grade motor that power the pump delivers top performance and is quiet in operation. It is also hermetically sealed and has thermal protection that helps prevent overheating.
• The multiple flow channels available helps keep sand particles away from the surface of the bearings.
• The pump comes with a built-in check valve also that keeps the water flow consistent and maintains the pressure within the pumping system. There is also a built-in suction that protects the impellers from clogging with debris.
• Product dimensions are 18.1 x 9.1 x 11.8 inches and weighs 22 pounds.

Pros and Cons

Pros

• Quiet operation.
• Highly efficient well pump.
• Durable casing and pump components.
• Longer lasting and powerful motor.
• Energy efficient motor.
• Consistent pressure delivery with no back-flow.
• Top level flow rate for a reliable supply of water.
• Affordable well pump.
• No maintenance required.
• Industrial quality pump.
• Corrosion and rust resistant pump.
• Long power cord.
• Easy to install.

Cons

• No negative featured noted.

Check Price

 

9. Happybuy 0.5 HP Deep Well Pump

The submersible deep well pump from Happybuy ranks high when it comes to flow rate and efficiency. It boasts a 0.5 HP motor that operates on 220V delivering 25 GPM max flow rate. It has 5 impellers which give consistent top performance. This pump can draw water from wells of up to 125 feet max head. It is made of stainless material and its motor is hermetically sealed so as to prevent overheating. Available also is a 5 feet long electric cord in addition to an inbuilt check valve. The pump is powerful enough to meet the needs of most households and industrial operations.

Features

• The 4 inch deep well submersible pump can fit a well with a 4 inch well casing.
• Comes with an electric cord that is 5 feet long.
• Delivers a class-leading flow rate of 25 GPM.
• It comes with a built-in check valve.
• The energy-efficient motor is thermal protected to prevent it from overheating.
• The pump has 5 impellers that give outstanding performance.
• It is made of stainless steel material which is strong and longer lasting.
• Can withstand PH levels of 6.5 to 8.5 and temperatures of up to 40℃.
• Packaging is 18 x 9 x 12 inches and shipping weight is 25 pounds.
• It comes with a user manual.

Pros and Cons

Pros

• It is easy to assemble.
• Energy efficient motor.
• The motor is thermal protected to prevent overheating.
• It has a long power cord.
• Versatile pump that can work perfectly in most operations.
• It has a control box that makes the pump easy to use.
• Durable thanks to its stainless steel construction.
• Quality for the money.

Cons

• The ground wire is not long enough.

Check Price

 

8. XtremepowerUS X5150 Deep Well Submersible Pump

This model from XtremepowerUS lives up to the manufacturer’s standards, a high quality, easy to use and durable well pump. The unit boasts a stainless steel construction which implies a sturdier and longer lasting pump. Those with the need for a reliable supply of water will find the pump most useful given its flow rate of 20 GPM.

Features

• The pump is made of a stainless steel construction.
• The pump uses 120 V, 6.2 Amps.
• Maximum head of the pump is 150 feet at 5 GPM to pump into an open reservoir or tank.
• It has a 10 foot long electric cord.
• Weighs 30 pounds.

Pros and Cons

Pros

• Excellent performer.
• Easy to use.
• Longer lasting motor.
• Durable pump.
• Resistant to corrosion and abrasion.
• Affordable.
• Quiet operation.
• Energy efficient pump.
• Runs well as expected.
• Does not require priming.

Cons

• Does not come with a control box.
• You have to install the check valve upon delivery.

Check Price

 

7. Red Lion 14942405 Deep Well Submersible Pump

The American-based Red Lion has never disappointed when it comes to the design of water pumping systems. The Red Lion 14942405 is a pump that is designed to meet the needs of those with deep wells. It comes with some unique features and an attractive price. It has a 0.5 HP motor that is quite powerful. The pump is ideal for wells that are 4 inches in diameter or larger from depths of 100 ft. The pump is powered by a 3 wire Franklin electric motor. It has a built in check valve which helps to prevent backflow and ensures system pressure, as well as a built suction screen which helps to prevent debris from clogging the impellers.

Features

• A deep well submersible pump with a motor of 0.5 HP 230V that delivers 12 GPM. It is designed for 4 inch or bigger wells.
• The hex rubber bearing has a large surface area which aims to ensure shaft stability.
• There are multiple flow channels which aim to keep small particles away from the bearing.
• The pump has 1/4 inch NPT thermoplastic discharge head which provides full-flow performance without the risk of corrosion.
• It is a 3 wire pump that has an inbuilt control box. You do not have to purchase an external control box.
• It is ideal for household use.
• The motor has a thermal protection that safeguards the motor from overheating.
• Designed by a USA based firm.
• Wiring kit and manual are included making it easy to install the pump.
• Can work for up to a maximum of 207 feet of head.
• Backed by a 3 year warranty provided by the manufacturer.
• Pump dimensions are 33 x 6 x 5 inches and it weighs 25 pounds.

Pros and Cons

Pros

• Longer lasting motor.
• Excellent flow rate per minute.
• Easy to install.
• Versatile.
• Requires zero maintenance.
• Premium construction.
• Delivers an efficient pumping performance.
• It has a built-in control box.

Cons

• More expensive than similar pumps.
• No negative feature noted.

Check Price

 

6. EZ Travel Collection Industrial Underground Submersible Well Pump

The EZ Travel Collection Industrial Underground Submersible Well Pump is a unique and top performing pump that can meet the water needs of most operations. It can meet the needs of small to large operations and its ingenious design guarantees it delivers consistently without the need for maintenance. The price proposition of the well pump is also impressive making it within reach to most buyers. It is not only an efficient task-master but it is also safe for supplying water for household needs. The stainless steel construction of the pump ensures the pump is longer lasting. It comes with a 100 feet electric cord for maximum convenience as well.

Features

• This is a submersible deep well pump capable of handling up to 133 foot maximum lift.
• Powered by a 1 HP, 120V, 60Hz that delivers an output of:
  • 18.5 GPM at 88 ft
  • 18.5 GPM
  • 5 GPM at 133 ft
  • 10 GPM at 118 ft
  • 12.5 GPM at 114 ft
  • 15 GPM at 108 ft
  • 7.5 GPM at 127 ft
• Made of stainless steel material with the discharge made of cast iron.
• The motor has a thermal protector that helps prevent overheating.
• Comes with thermoplastic intake screen, impellers, and diffusers.
• Included is a 100 feet electrical cord. The pump does not require a control box to operate.

Pros and Cons

Pros

• Boasts a top level performance.
• Stainless steel construction guarantees a longer service life.
• The impellers are made of thermoplastic which is durable.
• Long electric cord allows for easy connection.
• No control box required.
• Comes ready to run.
• Highly efficient well pump.
• Offers desirable flow rate per minute.
• Quiet when in operation.
• Comes prewired and easy to use.
• For use in many operations.
• Has best pressure and flow rate.

Cons

• No negative feature noted.

Check Price

 

5. Hallmark Industries MA0431X-18A-E Deep Well Submersible Pump

Two things that differentiate products from Hallmark Industries from those of its competitors are the product quality and price. The brand has capitalized on this in all its products. The Hallmark Industries MA0431X-18A-E Pump will not disappoint when it comes to quality and price. It is powered by a premium quality motor that is not only energy efficient but also powerful enough to generate a flow rate of up to 35 GPM. The pump itself is made of stainless steel making it sturdy and longer lasting. This cannot be compared to other pumps especially those with plastic bottoms. In addition to this, the motor cannot overheat since it has a capacitor and start and thermal protection.

Features

• The pump is made of stainless steel which is sturdy and longer lasting.
• It can deliver a maximum flow rate of up to 35 GPM.
• It comes with inbuilt control box and 3 HP capacitor start.
• Powered by 3 HP, 230V/60HZ/1PH motor.
• Works well in depths of up to 625 feet head.
• The discharge is made of heavy duty cast iron material.
• It can fit a 5 inch and larger wells.
• It comes with a patented impeller design that guarantees a longer life and heavy flow even when under server circumstances.
• The pump and motor are shipped unassembled.
• The 3 wire pump has 4 wires, that is, 3 wires in addition to the ground wire.
• It has top quality intake screen, impellers and diffusers.
• It does not require priming and operates quietly.
• Pump dimensions are 45 x 6 x 6 inches and it weighs 28 pounds.
• 1 year warranty provided by the manufacturer.

Pros and Cons

Pros

• Energy efficient motor.
• Excellent flow rate.
• Durable stainless construction.
• Efficient.
• Quality for money.
• Warranty is available.
• No priming required.
• Powerful start.
• Easy to install.
• The inbuilt control box makes it easy to control the pump.
• No overheating since the motor is well secured.
• Quiet operation.
• Works well for most operations.

Cons

• The wire install kit is not included.

Check Price

 

4. LOVSHARE 110V Deep Well Submersible Pump

One of the deep well submersible pumps that that measures up when it comes to high performance, affordability, and simplicity in use is this one from LOVSHARE. It is one of those that not only meet the needs of the household but also those of other applications such as: small industrial operations, gardening, lawn, irrigation, pool water maintenance, and many others.

It has a well-designed motor that utilizes a little amount of energy. The fact that it also stays underground and given its silent operation means that one will ever have a clue you have a pump. It is also important to remember that all submersible well pumps require the least maintenance. You will therefore service this one most likely once it its lifetime. The stainless steel body means it is resistant to rust, abrasion and corrosion and will last longer.

Features

• This is a 1.5 HP submersible well pump for deep wells with power capacity of 110 volts and 1100 watts. It has a control box.
• The user manual is included in the package. A 131 ft long power cord is also available.
• It can be used widely since it is powerful enough to meet the water needs of households in farmland and hilly areas. It can also service those in cities, railways, factories, and mines. The powerful motor can handle even the most demanding water needs.
• This pump is not only designed for drawing well water but it can also lift water from ground surface, rivers, canals, or reservoirs. It works well when it comes to transferring water from one point to the other.
• The technical features of the pump:
  • Voltage: 110V
  • Electricity: 17A
  • Single phasePump Rotational Speed (Rev): 2850 RPM
  • Applicable well diameter: 100 mm / 4 inch
  • Power: 1.1 KW / 1.5 HP
  • Pump Max flow: 9 M³/H 150 L/Min 40 GPM
  • Pump Rated low: 6 M³/H 100 L/Min 26.4 GPM
  • Frequency: 60 Hz
  • Impeller: 8 pcs
  • Pump Rated head: 35 m / 115 ft
  • Pump highest head: 64 m /210 ft
  • Gross weight: 19.6 kg
  • Cable: 40 m / 131 ft
  • Vertical / Horizontal Mounting: Yes.
• Pump dimensions are 24.8 x 10.2 x 15.3 inches and weighs 50.9 pounds.

Pros and Cons

Pros

• It is made of stainless steel body and hence it is longer lasting.
• Comes with am inbuilt check valve which eliminates the need to buy a separate external check valve.
• Comes with a 43 feet long power cord for convenience.
• Much cheaper when compared to other brands and models.
• Compact design pump that has a control box.
• Delivers incredible flow rate when in operation.
• Excellent and well built submersible well pump for deeper wells.
• Economical power consumption.
• It comes with the user manual.

Cons

• The plastic check valve is of poor quality.

Check Price

 

3. Goplus SU-21567+PE 1 HP Submersible Pump

Goplus is another reputed manufacturer of well pumps. The model SU-21567+PE is a deep well submersible pump that is silver in color and made of stainless steel material. This pump serves many purposes including: emptying yachts and boats, drawing water from wells and pits, fluid transfer, emptying reservoirs or containers, and many others. It is extremely powerful and will handle even the most demanding operations. The durable pump is designed to deliver water consistently for many years. It is a multi-purpose pump that effortlessly draws water from a deep well delivering a flow rate of 33 GPM.

Features

• It comes with a control box for easy operation.
• Delivers a maximum flow rate of 33 GPM which meets the water needs of most operations.
• Can work in temperatures of up to 95 °F and withstand PH values of 6.5 to 8.5. This means the pump can work in most regions.
• Its maximum working depth is 15 M or 49 feet. 200 feet max head for those with open water tanks.
• It has an inbuilt 1 HP capacitor start.
• The 2 wire pump has 3 wires, 2 wires and 1 ground wire.
• It is made of a stainless steel construction which is resistant to high temperatures and corrosion. This guarantees a longer service life.
• Product dimensions are 4 x 6 x 34 inches.

Pros and Cons

Pros

• Comes with a control box.
• Sturdy and durable well pump for deep wells.
• Capable to withstand high temperatures and different PH levels.
• Boasts a desirable flow rate to meet the water needs of most operations.
• Easy to use.
• Affordable.
• Versatile.
• It is a heavy duty pump that can handle the most demanding operations.
• It has a longer lasting motor.

Cons

• No negative featured noted.

Check Price

 

2. Red Lion RL22G10-3W2V Well Pump

Red Lion is a brand that spearheaded the advent of submersible well pumps. It is a brand whose name denotes quality for money. The model RL22G10-3W2V from Red Lion boasts a plethora of features that appeal to every buyer. It offers the best in performance, quality, and price proposition. The pump is designed to meet the water needs of households, industrial operations, small companies, and other operations that require a reliable water supply throughout the year. It strong points include the inbuilt suction screen check valve and the discharge heads that make it impossible for dirt and other debris to clog the impellers.

Features

• This is a submersible deep well pump that is made of stainless steel material. It is ideal for wells that are 4 inch wide or larger and depths of 100 feet.
• The bearing has extra large surface to provide maximum stability to the shaft. Available also are multiple flow channels that keep away sand particles from the surface of the bearing.
• The pump is powered by 1 HP motor that delivers a flow rate of 22 GPM.
• The discharge head is 1-1/4 inch made of thermoplastic that provides full-flow performance and is not prone to corrosion.
• This multi-purpose pump works perfectly for many applications; farms, cabins, rural households, and many others.
• Product dimensions are 43.2 x 5.7 x 4.6 inches and weighs 31.5 pounds.

Pros and Cons

Pros

• Highly versatile well pump.
• The impellers do not clog since they have a suction screen.
• Has check valve to prevent back flow and maintain system pressure.
• A quality for money.
• Bearing surfaces are well protected from sand particles and other debris.
• Durable thanks to the stainless steel construction.
• Delivers high level flow rate.
• The pump is well made.
• Warranty in place.

Cons

• It is expensive.
• You have to buy additional wiring separately since what is provided is not sufficient.

Check Price

 

1. Hallmark Industries MA0414X-7A Deep Well Submersible Pump

Top of the list of the most sought-after submersible well pump for the deep well is this ingenious model from Hallmark Industries. It is a solidly built pump that only lives up to expectations but supersedes what one would expect. First off, it is a 2 wire pump that comes with an inbuilt control box meaning there is no need for an external control box. Secondly, it measures up with 2 HP pumps when it comes to performance. Its 1 HP 230 Volts 5.1 Amps 7 stage capacity is sufficient power that helps push water up from depths of up to 207 feet. The pump shell and motor shaft are constructed using stainless steel material which is rust and corrosion-resistant. Available also is a long electric cord of 10 inches that make it possible to link the pump to the power source.

Features

• It is power capability is by a 1 HP, 230 V/60HZ and 7 stage generating maximum of 33 gallons per minute.
• Delivers top performance comparable to 2 HP pumps.
• It is ideal for deep wells of up to 207 feet head. It is good for household use.
• The shell and motor shaft are all made of stainless steel which is resistant to corrosion and rust. The pump is therefore lasts longer than all-plastic suction pumps.
• Comes with high quality sealed ball bearings that gives it its excellent performance.
• The hermetically sealed motor has a capacitor start backed by thermal protection so as to protect it from overheating. This also gives the motor a powerful start and guarantees a longer life of service.
• Comes with an inbuilt control and hence no need for an external control box.
• The pump uses a top quality UL approved motor.
• Backed by a one year warranty.
• Weighs 28 pounds and has dimensions of 30 x 4 x 4 inches.

Pros and Cons

Pros

• Covered by warranty.
• Silent in operation.
• Comes with a user manual and installation tape kit.
• The pump components such as impellers, intake screen, and diffusers are made of excellent quality thermoplastic.
• No need for external control box.
• The pump is made of stainless steel which is corrosion resistant, sturdy and longer lasting.
• Motor is secured from overheating by a capacitor and thermal protector.
• Offers top performance thanks to the powerful motor in addition to top quality sealed ball bearings.
• Best suited for deep wells.
• Relatively affordable as far as deep well submersible pumps go.
• Excellent flow rate and pressure settings.
• Easy to install.
• Self priming.

Cons

• No negative feature noted.

Check Price

 

A Final Word

It is almost impossible to imagine human life without water. If you are accustomed to the comfort of simply turning on a tap in your kitchen sink whenever you need water then you may not fathom life where clean drinking water is scarce. The best deep well submersible pumps makes it possible for residents to access water even in areas where the water table is low. They also help those who require an alternative source of water for their household.

The good news with the deep well submersible pumps is that they can last for 20 to 25 years without the need for any maintenance. In most cases, the pump is only checked twice in their service life. The other aspect that defines these types of pumps is that they are extremely quiet when in operation. They are also very efficient and can only fail when there is a serious. In this case, it has to be repaired or replaced. Overall, the submersible pump for the deep well is reliable and highly efficient when compared to other types of pumps. The ones explained above stand out from what is offered in the market at the present.